Aluminium, Magnesium & Zinc Alloys 

 
COVERFLUX  5     
Melting flux for Aluminum in reverberatory, rotary and large electric furnaces
       
COVERFLUX  11
Covering and drossing flux for Al alloy casting in crucible and electric furnaces
       
COVERFLUX  57
Reclamation flux for recovery of Aluminum from dross, chips, turning & borings
       
COVERFLUX  65
Sodium free coverflux, for Al alloys containing 2-6% Mg
       
COVERFLUX  66    
Sodium free cover flux for Al-alloys containing 1‑10% Mg hypereutectic Al-Si alloys
       
COVERFLUX  88    
For removal of oxides build up from furnace walls used for reverberate and rotary furnaces
       
COVERFLUX  29    
Modifying flux for Al‑Silicon alloys use as metal temp. between 790‑800'C
       
COVERFLUX  63    
Modifying flux for Al-Silicon alloys use as metal temp. between 740-750'C
       
COVERFLUX  58
Modifying flux for Al‑Silicon alloys use as metal temp. between 710‑720'C
       
COVERFLUX  56    
Recovering flux, recovering of Aluminum from dross/skimming
       
DEGASS 20    
For degassing all Al alloys
       
DEGASS 19    
For degassing/grain refining of all Aluminum alloys
       
DEGASS 40    
For degassing all Aluminium alloys excepts Al- Mg alloys
       
DEGASS 41
For degassing/grain refining of all Aluminiurn alloys excepts Al‑Mg alloys
       
DEGASS 60    
For degassing all Aluminium alloys
       
DEGASS 425
For degassing and Na or Ca removal for all Mg hypereutectic Al‑Si alloys
       
NUCLEO 2    
Strong grain refining of Al alloys by Ti and B
       
NUCLEO 10/11    
Grain refining for hypereutectic Al-Si alloys (13-15% Silicon)
       
NUCLEO 200    
Grain refining of Magnesium based alloys only
       
NUCLEO 6    
Grain refining of all Al alloys by Titanium only
       
NUCLEO 86    
Grain refining for high conductivity Al alloys nucleation by Boron only
       
NUCLLOY BT    
Ti and B base alloyed grain refiner
       
NUCLLOY S5    
Strontium base alloyed Al Modifies
       
ZINCFLUX 7    
Flux for melting ingot & cleaning scrap
       
ZINCFLUX 9    
Flux for dressing off and recovering of zinc from drosses
       
MAGFLUX    
Refining scrap for Magnesium alloys
       
MAGTECH    
Powder for producing an inert atmosphere during the holding and pouring of magnesium‑base alloys, also an inhibitor in Moulding sand Moulding sand
       
ENTOMBING 6    
Tablets for removal of Magnesium from Al alloys.